How to Fix “Unidentified Network and No Internet In Windows”: Tutorial Guide

Now the people of this era can’t live without the Internet. They are now too much used to of internet. Because the internet is great. It is able to give you everything in seconds. But what about when the internet does not actually work? In most cases, a little bit of troubleshooting should help fix any unidentified network errors or no internet in Windows. Today we will learn How to Fix “Unidentified Network and No Internet In Windows” then you will be able to take all of the important steps. In order to fix your internet so that you are also able to get back online as soon as possible.Unidentified Network on Internet

Lots of causes for internet issues are there on Windows. So you will have to try each step till you find a solution.

Check your Internet

However, you should first of all detect if your internet is actually working or not. It is a great beginning point to confirm that it is not an issue just related to a specific website or app. You have to head to your browser and then visit Google. Whether the page loads, so then your internet is working well. But other websites that you are accessing probably be temporarily down.

However, whether the page does not load, or it says that you are not connected to the internet. So it is time to start troubleshooting.

Resolve the Problems With Your Router Or Modem (“Unidentified Network and No Internet In Windows”)

Whether you know that your internet is not working. So you should clarify that there are not any problems with your router or modem. However, every networking device will work slightly differently, so we are also able to just offer a rough guide for these steps. Thus you probably have to determine your router or modem manual for specific details.

Switching off your router or modem and switching it back on is a great start. Await a few minutes for everything to come back online. Visit Google in order to view whether this resolves the unidentified network or no internet problem. However, whether not, so you have to continue with the steps mentioned below.

Whether You Are Using a Wired Connection: 

  1. First of all, you have to detect that the ethernet cable is connected to your computer correctly.
  2. Also, detect that the same ethernet cable is connected to your router or modem.
  3. Make sure that there is no injury to the cable.
  4. Also, you have to confirm that all the cables are secure in your router. Occasionally a loose cable is all it takes to lose internet access.
  5. Ensure the cable for your modem or router is connected securely to the port on your wall.
  6. Whether you are using a wireless access point, powerline adapter, or other networking equipment. Now confirm the connections are working and proper.

Related Article: How To Fix the issue If Wi-Fi Connected But No Internet?

Whether You’re Utilizing a Wireless Connection:

  1. Check the WiFi light on your router is enabled. Whether not, you then have to wait or call your ISP for assistance.
  2. Tap the arrow on the taskbar and also choose the networking option to attempt to reconnect to your network.
  3. Whether available, re-enter your WiFi password correctly.

Although after abiding by these steps, you have to attempt to visit Google again from your browser. Whether the connection still is not working, follow the next steps.

Update Your Network Card Driver

Similarly, windows 10 is great at automatically finding and also installing the right drivers for your hardware. Whether there is a potential driver problem, follow the steps that are mentioned below.

  • Head to the Start menu and search for Device Manager.
  • Head to the Device Manager.
  • Now you have to tap the arrow on the Network adapters option.
  • Right-click your network adapter.
  • Tap the Update Driver.
  • Click Search automatically for updated driver software.
  • Await for the driver installation method to complete.

Then again try to visit Google in your browser. Hopefully, your internet will now work.

Do not know that, which network adapter is the right one or which is wrong? You have to abide by the steps below to find out.

  • Head to the Start Menu.
  • Type CMD and tap on Command Prompt.
  • Type ipconfig /all and press enter.

You will view a number of results. There should be a single Ethernet or WiFi adapter. That will correspond with a name found in the device manager. Other results will most likely be for virtual ethernet devices like VPNs.

Turn Off the Virtual Ethernet Devices

Whether you have not found a solution so far. And you are still getting the errors about an unidentified network or have no internet. So you should have to try to remove any virtual ethernet drivers on your computer. As these are also able to cause major problems. With how your computer connects to the internet. Although a virtual ethernet driver could be anything from a VPN to software created to improve ping or packet loss.

Must Read this Article: Fix Stop Code Memory Management BSOD Error

You are also able to find virtual ethernet devices and turn off them by following the steps below.

  1. Head to the Start Menu.
  2. Type View Network Connections and tap on the result that appears.
  3. You will now view your ethernet devices.
  4. Now you have to right-click on each network device that belongs to software and tap Disable.
  5. Whether you are unsure, you are also able to Google the name of each network device to learn more before disabling them.

Both Ethernet and WiFi Adapters May Be Active

If two network adapters are active at the same time, this can cause issues with your connection. It’s always better to use a wired connection over WiFi, so you can simply disable your WiFi connection if this is a problem for you.

  1. Go to the Start Menu.
  2. Now search for View Network Connections and tap on the result.
  3. Right-click every adapter here and disable all of them except for your basic ethernet adapter.

In order to access WiFi networks in the future, so you must visit this page to turn on your WiFi adapter again.

Reset TCP/IP Stack (“Unidentified Network and No Internet In Windows”)

Utilizing this command will permit you. In order to reset some of your networking settings back to default. It is also able to resolve problems that probably have appeared after installing certain software or making manual conversions to your network settings.

  1. Head to the Start Menu.
  2. Type CMD and right-click on Command Prompt.
  3. Now you should tap Run as administrator.
  4. In the Command Prompt window, you have to type netsh int ip reset and then press enter.
  5. Restart your computer.

Whether you are still facing these problems, so then you have to follow the next troubleshooting steps that are mentioned below.

Resolve Problems With Your Network Adapter

Perhaps some underlying problems with your network adapter are there that can be quickly detected within the Windows control panel. Whether you have already updated your network adapter drivers. So you have to follow the steps below to try and diagnose other problems.

  1. First of all, you have to go to the Start Menu.
  2. Type View Network Connections and tap on the result that appears.
  3. Right-click on your active network adapter.
  4. Now you should tap diagnose and await for the troubleshooter to complete.

However, by default, whether your network adapter is set to utilize a static IP address. But it should be utilizing the DHCP, this should fix it. Although it is a good idea to detect yourself too. For doing this you have to, tap on Start, then Settings (gear icon), and then click on Network and Internet.

Next, tap on Change adapter options beneath the Change your network settings heading.

This will bring up another window that will display all of the network adapters on your system. Depending on the one that is active, so that you just have to right-click on it and also select Properties.

However, this brings up the Ethernet or Wifi Properties dialog box. Simply you have to tap on Internet Protocol Version 4 (TCP/IPv4) and tap on the Properties button.

At last, depending on your network, you either require to have the correct static IP information. Or you may need to just choose to Obtain an IP address automatically and Obtain DNS server address automatically.

Hopefully, this can resolve your problems, but whetehr not move onto the next step below.

Turn off the Firewalls In Your Antivirus

Firewalls are specially created to stop the worse traffic or actors from accessing your network. Because they deal with network access at an administrative level, they are also able to occasionally cause some network connectivity problems for simple tasks like browsing online.

In order to find out whether your antivirus firewall is causing problems with your internet connection. So then you should temporarily switch it off in order to detect it. Note that once it is switched off. Similarly, you could be endangered to attack, so you should just visit trusted websites.

Although you must search online for the way to turn off your firewall for your specific antivirus. Normally you will have to search for your antivirus via the start menu. Similarly, you have to head to the antivirus and also tap on the firewall option. Thus there will be some options for turning off the firewall for a set period of time.

Once turned off, now you should open your browser and visit a website like Whether your internet is working, you should uninstall that antivirus and try another one.

Also read: Guide: What is Msmpeng.exe & Should You Remove It?

“Unidentified Network and No Internet In Windows”-Conclusion

Alright, we hope that our guide has helped you to solve any issues with an unidentified network on your Windows computer. Whether you still need help, leave a comment below.

Leave a Reply

Your email address will not be published. Required fields are marked *