Windows Could Not Configure One Or More System Components
Well, keeping Windows 10 updated is really important. Even if you are not interested in new features actually, constant security updates basically keep your system safe from outside interference. Microsoft also believes in this firmly, and it is therefore challenging to avoid Windows 10 auto-updates as well. Let’s now discuss Windows Could Not Configure One Or More System Components. Let’s start!
Unfortunately, a large number of users have also reported receiving an error message avoiding a successful Windows update. It is actually a pretty scary and frustrating position to be in, however, it is pretty easy to fix. Here are some of the ways in order to fix the “Windows could not configure one or more system components” error.
- 1 Fix the Windows Could Not Configure One Or More System Components
- 1.0.1 Delete Internet Information Services
- 1.0.2 Turn of Internet Information Services
- 1.0.3 Remove IIS Machine Keys
- 1.0.4 Backup & Remove IIS Dependent Folders
- 1.0.5 Deleting & Updating Drivers
- 1.0.6 Uninstall Your Old Wi-Fi Drivers and Update Others
- 1.0.7 Using The Windows Media Creation Tool
- 1.0.8 Unplug your SD Card Reader
- 1.0.9 Conclusion
What Actually The “Windows Could Not Configure One Or More System Components” Error Is?
Well, as far as error messages go, “Windows could not configure one or more system components. In order to install windows, just restart the computer and then restart the installation.” is really lengthy and vague. You are likely only to see it when updating your PC, and because Windows 10 auto-updates all the time actually. There is actually no easy way to avoid running into this error at some point. Even worse, restarting rarely fixes the problem actually.
There are a lot of possible reasons for this error can occur. Much like recovering corrupted video, there is actually no one way in order to fix this error, and you may have to try many of the methods demonstrated in this article. If you guys are unable to boot your computer normally, then boot into safe mode.
For convenience, I’ll actually refer to the “Windows could not configure one or more system components” error. Because the System Components Error throughout this article as well.
What actually Causes the “Windows could not configure one or more system components” Error?
There are a lot of things to look out for if you want to stay away from this irritating error code. Let’s see the full list:
- Faulty or missing keys used to encrypt the configuration store for the AES Provider
- Old and outdated wireless drivers (or drivers in general)
- Misconfigured or faulty Internet Information Services tool that has to be uninstalled
Fix the Windows Could Not Configure One Or More System Components
Delete Internet Information Services
Windows 10 basically comes bundled along with features in order to suit everyone. If you are a light day-to-day user, or a seasoned network engineer working along with Windows Servers and .NET apps. Then you can also install the same operating system and also get the same functionality straight out of the box.
Well, unfortunately, web server software called Internet Information Services (IIS) can also be responsible for the System Components Error. You have to follow each and every section to turn off and rule out IIS as a cause.
Turn of Internet Information Services
- In order to disable IIS, tap on the Windows key and type features, choosing Turn Windows features on or off whenever it appears.
- Just search for Internet Information Services in the list, and then uncheck both boxes. You have to click on OK when prompted with the warning. IIS will then automatically uninstall.
- If you guys get a message that says Permission Denied, then make sure you guys are using an account with administrator privileges.
Remove IIS Machine Keys
Well, one possible cause for the System Components Error is the machine keys used via the IIS to hash and encrypt information actually. During the update, the installer finds these keys and also fails. This is likely a botched security feature as well. The easy way in order to solve it is to delete your old machine keys.
- First, just opens an Explorer window.
- Now navigate to C:\ProgramData\Microsoft\Crypto\RSA\MachineKeys.
- If the folder looks empty, then choose View and tap on the Hidden Items checkbox.
- Remove each and every file in the MachineKeys folder.
Along with these files gone, the updater can actually create new ones in their place. This solution reportedly works for most of the users. If the update still fails, then you should try the next step.
Backup & Remove IIS Dependent Folders
When you are removing the IIS should remove all of the files associated with it, it rarely does. Even if you never had the IIS feature turned on, there are still a lot of places you will find files it uses on your hard drive as well. Moving these files is actually a potential solution to the System Components Error.
- You have to create a folder on the Desktop and then name it IIS Backup.
- Then open Explorer, and also navigate to C:\Windows\WinSxS.
- Now in the search dialog, you have to type *windows-iis* and hit Enter.
- Choose each and every file the search returns and tap on Ctrl + X in order to cut them.
- Return to the IIS Backup folder on the Desktop and then tap on Ctrl + P to paste the files.
- Now navigate to C:\Windows\System32.
- You need to find the folder inetsrv and then tap Ctrl + X to cut it.
- Then paste it into the IIS Backup folder.
However, far less common than the Machine Keys issue, some of the users reported successful updates after all these steps. When the update is complete, then you can move the IIS Backup folder from the Desktop to the Recycle Bin as well.
Deleting & Updating Drivers
Well, another possible reason for the System Components Error links to system networking drivers actually. The common solution is just to uninstall your system’s Wi-Fi driver and update all other network drivers. Keep in mind that you should prepare an ethernet cable in order to remain connected to the internet during these steps.
- Tap on the Windows key and type Device Manager.
- Under Network Adaptors right-tap on your Wi-Fi adapter and choose Uninstall.
- For each and every other entry in the list, then right-tap and choose Update Driver.
In most of the cases, these steps have allowed the update in order to complete successfully as Well. After the update, reinstalling the Wi-Fi adaptor should not cause any issues, and then you can also continue via your PC as usual.
Uninstall Your Old Wi-Fi Drivers and Update Others
Well, your old and outdated drives are also a cause for this error actually. Most of the time you guys can fix it via uninstalling your old Wi-Fi drivers, and you have to update all of your drivers in some cases.
- Tap on Windows +R in order to open the Run dialog. Then type in devmgmt.msc in the box and tap on OK in order to run Device Manager.
- Now locate your old wireless adapter driver under Network adapters. Right-tap on it and choose Uninstall device from the context menu. Then, click Uninstall in the pop-up window as well.
- As for the other drivers you have to update, just right-tap on them and choose Update driver. The selected drivers will then be updated automatically.
After you complete the operation, then just run the Windows upgrade or installation again. In order to see if the error is removed.
Using The Windows Media Creation Tool
Well, if an update was released for Windows 10 and then you tried in order to install it the conventional way before you even received the error code. Then you might want to try an alternative that consists of via the Windows Media Creation Tool. This is actually a file you download from Microsoft’s official website. It will give you the option in order to update Windows to the latest build after you download it.
Given that the System Components Error mostly occurs during an update. It is unsurprising that the Media Creation Tool’s update feature is quoted as a potential fix actually. It is available from the Microsoft website and needs no installation in order to use.
Whenever the download is complete:
- First, you have to open the Media Creation Tool.
- Then agree to the license agreement.
- Whenever asked What do you want to do? Choose Upgrade this PC now.
- You have to follow the onscreen prompts in order to update your system.
It’s actually not clear why this method can work where others fail. However, according to most of the users, it was the solution actually.
Unplug your SD Card Reader
This might be an odd way in order to solve the problem However, a lot of users suggested that the problem has automatically fixed itself after the users have disconnected the SD card from their respective PCs. You guys can also reconnect if after the update finishes or after you guys install Windows successfully!
Well, for clarity, this basically seems to apply to both external SD card readers and built-in. Deleting the SD card before retrying the update reportedly resulted in a smooth update as well.
You are good to go. If you have any queries and issues related to this article then let us know in the comments section below.